The Grinder Series E is intended primarily for the private domestic market, with its emphasis on compact size, easy handling and versatility. Ecological motors with low energy consumption are adequately proportioned to ensure dependable and generous performance.
GENERAL INFORMATION ON ELECTROMECHANICAL UNIT |
|
Test voltage and frequency |
Single phase : 220 ÷ 240 Volt - 50 Hz |
Direction of rotation |
Clockwise seen from top of the pump |
Type of impregnation |
Double impregnated humidity-resistant winding |
Type of motor winding (Single phase) |
Induction motor with dry winding and automatic thermal protection |
Type of motor winding (Three phase) |
Induction motor with dry winding and automatic thermal protection |
LIST OF MATERIALS / PAINTING |
|||
Motor cable 10 meters |
H07RN-F |
Nuts and bolts |
A2 steel |
Electromechanical unit |
EN-GJL-250 cast iron |
Paint |
Ecological epoxy vinyl |
Hydraulic unit and impeller |
EN-GJL-250 cast iron |
Cooling Sleeve |
- |
Motor Shaft |
X30Cr13 (AISI420) stainless steel |
Cutter |
X102CrNiMo17Ku Steel |
LIMITS ON USE AND APPLICABLE STANDARDS |
|||
Max. liquid temperature |
40ºC |
Max. immersion depth |
20m |
Type of Pump |
Absorption |
Type of pump |
Absorption |
Power |
Poles |
R.p.m |
Outlet BSP |
Free passage |
|
Single Phase |
A |
Three Phase |
A |
kW |
|
min |
Ø mm |
H/V |
Ø mm |
GRE 200/2M |
10,6 |
GRE 200/2T |
3,8 |
1,7 |
2 |
2900 |
50 |
? H |
7 |
|
