|
|
|
The Grinder Series N is designed for professional industrial use, with a multitude of features in the vanguard of technology and construction, it is available fitted with a wide range of high performance, low energy consumption motors.
GENERAL INFORMATION ON ELECTROMECHANICAL UNIT |
Test voltage and frequency |
Single phase : 220 ÷ 240 Volt - 50 Hz
Three phase : 380 ÷ 415 Volt - 50 Hz
|
Direction of rotation |
Clockwise seen from top of the pump |
Type of impregnation |
Double impregnated humidity-resistant winding |
Type of motor winding (Single phase) |
Induction motor with dry winding and manual thermal protection |
Type of motor winding (Three phase) |
Induction motor with dry winding and manual thermal protection |
LIST OF MATERIALS / PAINTING |
Motor cable 10 meters |
H07RN-F |
Nuts and bolts |
A2 steel |
Electromechanical unit |
EN-GJL-250 cast iron |
Paint |
Ecological epoxy vinyl |
Hydraulic unit and impeller |
EN-GJL-250 cast iron |
Cooling Sleeve |
X5C4Ni18-10 (AISI304) steel |
Motor Shaft |
X30Cr13 (AISI420) stainless steel |
Cutter |
X102CrNiMo17Ku Steel |
LIMITS ON USE AND APPLICABLE STANDARDS |
Max. liquid temperature |
40ºC |
Max. immersion depth |
20m |
Type of Pump
|
Absorption |
Type of pump
|
Absorption |
Power |
Poles |
R.p.m |
Outlet BSP
|
Free passage |
Single Phase |
A |
Three Phase |
A |
kW |
|
min |
Ø mm
|
H/V |
Ø mm |
GRN 250/2M |
12,5 |
GRN 250/2T |
3.9 |
1.8 |
2 |
2900 |
50 |
? H |
7 |
- |
- |
GRN 300/2T |
5.1 |
2.2 |
2 |
2900 |
50 |
? H |
7 |
- |
- |
GRN 400/2T |
6.7 |
3 |
2 |
2900 |
50 |
? H |
8 |
- |
- |
GRN 550/2T |
8.7 |
4.1 |
2 |
2900 |
50 |
? H |
8 |
Power Range |
1,8kw to 4,1kw
|
DN Outlet Range |
50mm BSP |
Poles / R.p.m. |
2 / 2900 |
Max. Head |
48,0m |
Max. Capacity |
8,2l/sec
29,3m ³ /h
|
SPECIFICATIONS |
Upper and lower permanently lubricated ball bearings |
Class H Motor Insulation |
Thermistor, capacitor and circuit breaker - standard on all single phase |
Thermistor and relay standard on all Three Phase models |
2 Mechanical Seals, silicon carbide (viton) and 1 lip seal, 1 seal in Oil bath on GRN 250/300 and 400 models |
3 Mechanical Seals, 2 silicon carbide (viton) and 1 carbon ceramic, 2 in Oil bath on GRN 550 model |
OVERALL DIMENTIONS |
|
PAGE 2 |
of 3 |
|
|
|
|