The Dreno AP Series N is designed for professional industrial use, with a multitude of features in the vanguard of technology and construction; it is available fitted with a wide range of high performance, low energy consumption motors.
GENERAL INFORMATION ON ELECTROMECHANICAL UNIT |
|
Test voltage and frequency |
Single phase : 220 ÷ 240 Volt - 50 Hz Three phase : 380 ÷ 415 Volt - 50 Hz |
Direction of rotation |
Clockwise seen from top of the pump |
Type of impregnation |
Double impregnated humidity-resistant winding |
Type of motor winding (Single phase) |
Induction motor with dry winding and manual thermal protection |
Type of motor winding (Three phase) |
Induction motor with dry winding and manual thermal protection |
LIST OF MATERIALS / PAINTING |
|||
Motor cable 10 meters |
H07RN-F |
Nuts and bolts |
A2 steel |
Electromechanical unit |
EN-GJL-250 cast iron |
Paint |
Ecological epoxy vinyl |
Hydraulic unit and impeller |
EN-GJL-250 cast iron |
Motor Shaft |
X30Cr13 (AISI420) stainless steel |
LIMITS ON USE AND APPLICABLE STANDARDS |
|||
Max. liquid temperature |
40ºC |
Max. immersion depth |
20m |
|
||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||||
