The Dreno AP Series S is intended for domestic use, as demonstrated by its compact size achieved by a pump body cast together with the electromechanical unit, convenient handling permitted by its light weight and easy carrying handle, and the versatility permitted by the generous starting torque and operation of its motors.
GENERAL INFORMATION ON ELECTROMECHANICAL UNIT |
|
Test voltage and frequency |
Single phase : 220 ÷ 240 Volt - 50 Hz Three phase : 380 ÷ 415 Volt - 50 Hz |
Direction of rotation |
Clockwise seen from top of the pump |
Type of impregnation |
Double impregnated humidity-resistant winding |
Type of motor winding (Single phase) |
Induction motor with dry winding and automatic thermal protection |
Type of motor winding (Three phase) |
Induction motor with dry winding and automatic thermal protection |
LIST OF MATERIALS / PAINTING |
|||
Motor cable 10 meters |
H07RN-F |
Nuts and bolts |
A2 steel |
Electromechanical unit |
EN-GJL-250 cast iron |
Paint |
Ecological epoxy vinyl |
Hydraulic unit and impeller |
EN-GJL-250 cast iron |
Motor Shaft |
X30Cr13 (AISI420) stainless steel |
LIMITS ON USE AND APPLICABLE STANDARDS |
|||
Max. liquid temperature |
40ºC |
Max. immersion depth |
20m |
LIMITS ON USE AND APPLICABLE STANDARDS |
|||
Max. liquid temperature |
40ºC |
Max. immersion depth |
20m |
Type of Pump |
Absorption |
Type of Pump |
Absorption |
Power |
Poles |
R.p.m |
Outlet BSP |
Free passage |
|
Single Phase |
A |
Three Phase |
A |
kW |
|
min |
Ø mm |
H/V |
Ø mm |
APS 100/2M |
6,6 |
APS 100/2T |
2,1 |
0,9 |
2 |
2900 |
40 |
? H |
10 |
|
