The Draga Series P is intended for specific industrial uses, featuring a wide range of high performance motors and generously proportioned moving and stationary parts thus guaranteeing efficiency and durability.
GENERAL INFORMATION ON ELECTROMECHANICAL UNIT |
|
Test voltage and frequency |
Three phase : 380 ÷ 415 Volt - (660-715 Volt) 50 Hz |
Direction of rotation |
Clockwise seen from top of the pump |
Type of impregnation |
Double impregnated humidity-resistant winding |
Type of motor winding (Three phase) |
Induction motor with oil-filled winding and manual thermal protection |
LIST OF MATERIALS / PAINTING |
|||
Motor cable 10 meters |
H07RN-F |
Nuts and bolts |
A2 steel |
Electromechanical unit |
EN-GJL-250 cast iron |
Paint |
Ecological epoxy vinyl |
Hydraulic unit and impeller |
EN-GJL-250 cast iron |
Motor shaft |
X30Cr13 (AISI420) stainless steel |
LIMITS ON USE AND APPLICABLE STANDARDS |
|||
Max. liquid temperature |
40ºC |
Max. immersion depth |
20m |
Type of Pump |
Absorption |
Type of pump |
Absorption |
Power |
Poles |
R.p.m |
Outlet BSP |
Free Passage |
|
Single Phase |
A |
Three Phase |
A |
kW |
|
min |
Ø mm |
H/V |
Ø mm |
- |
- |
DGP 550/4/80T |
10,1 |
4,6 |
4 |
1450 |
80 |
? H |
60 |
|
